|
||
|
"LEFT CLICK" the above link to see the sales flyer/brochure..........
PARTITION WALL HANGING SHELF.
FURTHER to pdf information: Additional information / amendments to the pdf sales brochure are as below ........
a) "Golden Beech" and "Biege " shelves are also available, as well as white and black ( white is shown in the pdf sales brochure). All partition wall hanging shelves are melamine 900mm long x 300mm wide x 16mm thick as standard.
b) Brackets to suite 50mm thick partition walls are now also available, ( Therefore partition walls with thicknesses 25mm, 40mm, 50mm and 75mm are suitable for using the Hanging Shelf. Note that the shelf brackets have a little extra width to allow for any small variations, or fabric thicknesses that can occur with partitions.
c) Brackets come in two colours, that is "pearl white", and "charcoal " (very dark grey) to suite modern office furnishing. They are powder coated steel. The Plastic Fasteners are either white or black ( white for white brackets and black for the medium and dark brackets).
However, any colour or design is possible, subject to production minimum volumes and delivery times. Please check with us.
Similarly, brackets for fastening directly to a wall can be supplied, but is not standard. Please check.
CAUTION: Use common sense and do not overload any shelf. A typical load should be similar to that shown on the pdf, and the responsibility for this must remain with the user. INSTRUCTIONS: Hang two brackets from the top of the partition wall, fit wooden shelf in between and align holes. Push fasteners through the holes with thumb, and it is done. (The fasteners can be pushed down from the top, or up from the bottom, please choose what you are happiest with.) |
||
| © 2005 Pet Portions |
